Illuminated Marquee Poster Case with Chase Lights (PC-MARQ)
Made in the USA, our lightboxes have been thoroughly tested for optimum light distribution and ease of poster removal.
All of our lightboxes are made with the highest quality anodized aluminum in a sleek black finish with precision mitered corners. These are simply the finest looking poster lightboxes available anywhere!
Illumination is provided by a series of 48 flashing bulbs (configured as 2-point chase lights).. these bulbs alternate on and off to give the appearance of rotation (see sample animation below). There are also 2 energy efficient, cool running fluorescent bulbs that offer even light distribution. A small low-profile rocker switch on the bottom means you'll never have to unplug your lightbox to turn it off.
A 3-prong power cord comes out near the bottom-center of the case. The on/off power switch is located next to the power cord on the case bottom and turns the chase lights/fluorescent bulbs on and off together. Optionally, the case may be custom hardwired with a pigtail coming out the center-back (if you need another location, please let us know).
There is a thin, black metal border that runs along all 4 sides of the poster opening. Simply get your fingers under each of these spring-loaded metal borders and lift outward (see photo below). Do this to all 4 sides. Then you can remove the clear plexi and diffuser and sandwich the poster between the two.
Simply open the case and drill 2 holes through the metal back that correspond to the spacing of the studs in your walls (typically 16-inches apart). Then use 2 long screws (2.5 - 3 inch) to secure the case to the wall. Can be customized for ceiling mounting with optional D-Rings on top and with a finished back or custom made double-sided with chase lights and posters on both sides.
* All aluminum construction in a sleek black finish
* The spring loaded Quad-Lock frame means effortless, no-tool poster changes
* Comes complete with clear acrylic diffuser and clear poster cover
* Utilizes 7-Watt miniature screw-in clear bulbs (included)
* Exterior dimensions: 37.5"w x 50"h x 5.5"d
* Approximate weight: 30 pounds
* Accommodates 27" x 40"/41" Movie Posters
* Custom Sizes for 24" x 36" Movie Posters and other sizes are available
* 1-year manufacturer warranty
* UL & CSA Certified
* Posters not included.
50 Chase bulbs (approximately 7.5 watts each) = 187.5 Watts (half of the lights on at any one time)
2 Florescent Tubes (48-inch, Type T8, 32 watts each) = 64 Watts
Draws about 2.2 Amps
Standard US outlet 110/120-Volts
Replacement Miniature Light Bulbs are available separately... see SKU: HCP0612
Replacement Acrylic Sheets (Overlay Set) are available separately... see SKU: HCP0858
Standard cases: Typically ship in 2-5 business days.
Custom cases: Add 4-6 week lead time.
Ships via Ground Freight.
Contact Us for Large Quantity orders for pricing and stock.