LED Step Light Kit with Dusk-to-Dawn Sensor
LED step light kit with a dusk-to-dawn sensor that is suitable for indoor or outdoor use.
Comes with 10 White LED Step Lights and 10-port Junction Box. Can be expanded to 45 LEDs.
Perfect for home theater aisle, stair and step lighting!
* Many Uses: may be used indoors or outdoors to illuminate stairways, aisles, decks, flooring, or pathways.
* 10 White LED Step Lights: kit includes ten white LED step lights that measure 19/32-in (15mm, 0.59 inches) in Diameter.
* Super Bright LEDs: each step light uses a super bright white LED encased in a steel housing, which is pre-wired with a 16.5-ft electrical cable (Each LED is similar in brightness to a 2-Watt incandescent bulb).
* Junction Box (IP44 rated): 10-port junction box is included, which is powered by a 12-V plug-in transformer (NOTE: During installation the junction box should be positioned so the ports are facing downward toward the ground. This will help to prevent moisture from getting into the ports).
* Transformer: 12-V plug-in transformer with a 33-ft electrical cable is included... Do not subject to moisture or dampness.
* Dusk-to-Dawn Sensor: Includes a photocell with a 16.5-ft cable that automatically turns the step lights on at dusk and off at dawn. The photocell has no effect on the electrical outlet that the kit is plugged into. If you prefer to turn the step lights on-and-off with a wall switch that controls the electrical outlet, simply do not connect the photocell to the kit.
* May be Used Outdoors: LED step lights are IP66 approved, water and dust resistant.
Expandable to 45 LED Step Lights... you may expand your kit by purchasing additional junction boxes and step lights. The included transformer will power up to 46 step lights with 4 additional junction boxes. Purchase additional step lights and junction boxes below.
NOTE: There are two different methods of adding extra junction boxes:
(1) the 2nd, 3rd, 4th, and 5th junction boxes can each be plugged into ports belonging to the 1st junction box.
(2) the 2nd junction box can be plugged into the 1st junction box, the 3rd junction box can plugged into the 2nd junction box, and so on in a daisy-chain fashion.
Easy to install... Drill a 5/16-in hole for each LED step light and feed the step light cable through each hole to the junction box; then drill a 15/32-in hole for the dusk-to-dawn sensor and feed the photocell cable through this hole to the junction box; then connect the plug-in transformer to the junction box and plug the transformer into an electrical outlet.
Also Available... LED Color Changing Step Light Kit... see SKU: PAL1017