Lace and Grommet Da-Lite Video Movie Screen Frame 300 Series (4x3 A.R.) Description
Da-Lite Series 300 Lace and Grommet Frame (4x3 Aspect Ratio)
For use with Standard NTSC 4x3 format screens (1.33:1)... sold separately.
Lace and Grommet Framing System - contact us for custom sizes not shown below.
Constructed of 3" diameter aluminum tubing with radius frame corners. Features a black, powder coated finish. Frame sections to be slip fit at corners.
Available with 7" wide Pro-Trim?« Masking Cover for non-curved frames to conceal screen binding and lacing cord (99462). Pro-Trim will enhance appearance and absorb light surrounding the viewing area with the black velour covered front surface. Note: Pro-Trim is for use with lace-and-grommet screens that have a 2-inch binding only.
Curved Frame (optional):
Curved frames are very popular for conventions and other expos. The Curved Series 300 Frame may be specified to any degree of single axis curve with a maximum width of 90' (99463). The curvature is from the point-of-view of looking down at the top of the frame (it will look like an arc). The left and right sides will curve out towards the audience. Please specify the amount of curvature by stating the radius of the circle and the degrees of screen arc (see 2 examples in the diagram below)... alternately, send us a diagram for a quote. Note: Pro-Trim is not available with a curved frame.
The only tool you will need to assemble your lace and grommet frame is a 9/16"" wrench. End tubes are color-coded for easy assembly.
Frame can be suspended from ceiling by means of included eyebolts installed on to the top frame section. Wall mount hanger brackets with frame clamps are included for wall mounting.
Black Shock Lacing Cord and "S" Hooks are included and positioned.
Overall frame sizes listed below are 14-inch larger than screen viewing area (7" each side) when used with standard 2-inch screen binding. If you need a larger frame size, please contact us via email or phone.
The Series 300 Frame is recommended for use with Da-Lite front projection screen surfaces in sizes up to 90' wide and rear projection screen surfaces in sizes up to 40' wide.
NOTE: Lace and Grommet Screen Fabric is not included and is sold separately.
NOTE: All Da-Lite frames are custom-made to your specifications and typically take 3-7 business days for production.